home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Monster Media 1994 #2
/
Monster Media No. 2 (Monster Media)(1994).ISO
/
drivers
/
lmppd4.zip
/
TT1000-4.PPD
< prev
next >
Wrap
PostScript Printer Description
|
1994-05-10
|
13KB
|
370 lines
*PPD-Adobe: "4.0"
*% Adobe Systems PostScript(R) Printer Description File
*% For "LM TrueTech 1000/4"
*%
*% Copyright 1993 LaserMaster Corporation
*% All Rights Reserved.
*% Permission is granted for redistribution of this file as
*% long as this copyright notice is intact and the contents
*% of the file is not altered in any way from its original form.
*%
*% Edited by Donn Edwards, Reflex DTP Systems, May 10, 1994
*% Date: 8 March, 1993
*FormatVersion: "4.0"
*FileVersion: "2.61"
*LanguageVersion: English
*PCFileName: "TT1000-4.PPD"
*Product: "(LM TrueTech 1000/4)"
*PSVersion: "(47.0) 2"
*ModelName: "TrueTech 1000/4"
*NickName: "LM TrueTech 1000/4"
*% ===Basic Capabilities ===============
*AcceptsTrueType: True
*TrueImageDevice: True
*ColorDevice: False
*LanguageLevel: "1"
*DefaultColorSpace: Gray
*FreeVM: "1242004"
*VariablePaperSize: False
*FileSystem: False
*?FileSystem: "
save statusdict begin
(False) /diskstatus where{
pop diskstatus exch pop 0 ne {pop (True)} if
}if = flush
end restore"
*End
*Throughput: "8"
*Password: "0"
*ExitServer: "
count 0 eq { % is the password on the stack?
true
}{
dup % potential password
statusdict begin checkpassword end not
} ifelse
{ % if no password or not valid
(WARNING : Cannot perform the exitserver command.) =
(Password supplied is not valid.) =
(Please contact the author of this software.) = flush
quit
} if
serverdict begin exitserver
"
*End
*Reset: "
count 0 eq { % is the password on the stack?
true
}{
dup % potential password
statusdict begin checkpassword end not
} ifelse
{ % if no password or not valid
(WARNING : Cannot reset printer.) =
(Password supplied is not valid.) =
(Please contact the author of this software.) = flush
quit
} if
serverdict begin exitserver
systemdict /quit get exec
(WARNING : Printer Reset Failed.) = flush
"
*End
*OpenUI *Resolution/Choose Resolution: PickOne
*OrderDependency: 10 AnySetup *Resolution
*DefaultResolutionOption: 1000x400dpi
*ResolutionOption 1000x400dpi/1000x400 dpi: "statusdict begin false proofmode end"
*ResolutionOption 400dpi/400 dpi: "statusdict begin true proofmode end"
*?Resolution: "
save
initgraphics
0 0 moveto currentpoint matrix defaultmatrix transform
72 0 lineto currentpoint matrix defaultmatrix transform
3 -1 roll sub dup mul
3 1 roll exch sub dup mul
add sqrt round cvi
10 string cvs
(x)
0 0 moveto currentpoint matrix defaultmatrix transform
0 72 lineto currentpoint matrix defaultmatrix transform
3 -1 roll sub dup mul
3 1 roll exch sub dup mul
add sqrt round cvi
10 string cvs print print print (dpi) = flush
restore"
*End
*CloseUI: *Resolution
*% Halftone Information ===============
*ScreenFreq: "70.0"
*ScreenAngle: "45.0"
*DefaultScreenProc: Dot
*ScreenProc Dot: "
{dup mul exch dup mul add 1.0 exch sub }
"
*End
*ScreenProc Line: "{ pop }"
*ScreenProc Ellipse: "{ dup 5 mul 8 div mul exch dup mul exch add sqrt 1 exch sub }"
*DefaultTransfer: Null
*Transfer Null: "{ }"
*Transfer Null.Inverse: "{ 1 exch sub }"
*Transfer Normalized: "{ }"
*Transfer Normalized.Inverse: "{ 1 exch sub }"
*% Paper Handling ===================
*% Use these entries to set paper size most of the time, unless there is
*% specific reason to use PageRegion or PaperTray.
*OpenUI *PageSize: PickOne
*OrderDependency: 30 AnySetup *PageSize
*DefaultPageSize: A4
*PageSize Letter: "statusdict begin letter end"
*PageSize Legal: "statusdict begin legal end"
*PageSize A4: "statusdict begin a4 end"
*PageSize LetterSmall: "statusdict begin letter lettersmall end"
*PageSize A4Small: "statusdict begin a4 a4small end"
*?PageSize: "statusdict begin pagetype = end"
*CloseUI: *PageSize
*% These entries will set up the frame buffer. Usually used with manual feed.
*OpenUI *PageRegion: PickOne
*OrderDependency: 40 AnySetup *PageRegion
*DefaultPageRegion: A4
*PageRegion Letter: "letter"
*PageRegion Legal: "legal"
*PageRegion A4: "a4"
*PageRegion LetterSmall: "lettersmall"
*PageRegion A4Small: "a4small"
*CloseUI: PageRegion
*% These entries will invoke a particular tray--error may occur if tray is not inserted.
*% These errors should be trapped by software and a message displayed
*DefaultPaperTray: None
*PaperTray Letter: "statusdict begin lettertray end"
*PaperTray Legal: "statusdict begin legaltray end"
*PaperTray A4: "statusdict begin a4tray end"
*% The following entries provide information about specific paper keywords.
*DefaultImageableArea: A4
*ImageableArea Letter: "15 8 597 776 "
*ImageableArea Legal: "15 8 597 1000 "
*ImageableArea A4: "13 10 577 832 "
*ImageableArea LetterSmall: "31 31 583 761 "
*ImageableArea A4Small: "27 31 567 811 "
*?ImageableArea: "
save
newpath clippath pathbbox
4 -1 roll =
3 -1 roll =
exch = = flush
restore
"
*End
*% These provide the physical dimensions of the paper (by keyword)
*DefaultPaperDimension: A4
*PaperDimension Letter: "612 792"
*PaperDimension Legal: "612 1008"
*PaperDimension A4: "595 842"
*PaperDimension LetterSmall: "612 792"
*PaperDimension A4Small: "595 842"
*RequiresPageRegion All: True
*DefaultOutputBin: OnlyOne
*DefaultInputSlot: LargeCapacity
*OpenUI *ManualFeed: Boolean
*OrderDependency: 20 AnySetup *ManualFeed
*DefaultManualFeed: False
*ManualFeed True: "statusdict begin /manualfeed true store end"
*ManualFeed False: "statusdict begin /manualfeed false store end"
*?ManualFeed: "statusdict /manualfeed get
{(True)}{(False)}ifelse = flush"
*End
*CloseUI: *ManualFeed
*DefaultOutputOrder: Normal
*DefaultCollator: None
*DefaultSorter: None
*DefaultDuplex: None
*% Font Information =====================
*DefaultFont: Courier
*Font AvantGarde-Book: Standard "(001.001)"
*Font AvantGarde-BookOblique: Standard "(001.001)"
*Font AvantGarde-Demi: Standard "(001.001)"
*Font AvantGarde-DemiOblique: Standard "(001.001)"
*Font Bookman-Demi: Standard "(001.001)"
*Font Bookman-DemiItalic: Standard "(001.001)"
*Font Bookman-Light: Standard "(001.001)"
*Font Bookman-LightItalic: Standard "(001.001)"
*Font Courier: Standard "(001.004)"
*Font Courier-Bold: Standard "(001.004)"
*Font Courier-BoldOblique: Standard "(001.004)"
*Font Courier-Oblique: Standard "(001.004)"
*Font Helvetica: Standard "(001.001)"
*Font Helvetica-Bold: Standard "(001.001)"
*Font Helvetica-BoldOblique: Standard "(001.001)"
*Font Helvetica-Narrow: Standard "(001.000)"
*Font Helvetica-Narrow-Bold: Standard "(001.000)"
*Font Helvetica-Narrow-BoldOblique: Standard "(001.000)"
*Font Helvetica-Narrow-Oblique: Standard "(001.000)"
*Font Helvetica-Oblique: Standard "(001.001)"
*Font NewCenturySchlbk-Bold: Standard "(001.002)"
*Font NewCenturySchlbk-BoldItalic: Standard "(001.001)"
*Font NewCenturySchlbk-Italic: Standard "(001.001)"
*Font NewCenturySchlbk-Roman: Standard "(001.002)"
*Font Palatino-Bold: Standard "(001.000)"
*Font Palatino-BoldItalic: Standard "(001.000)"
*Font Palatino-Italic: Standard "(001.000)"
*Font Palatino-Roman: Standard "(001.000)"
*Font Symbol: Special "(001.001)"
*Font Times-Bold: Standard "(001.001)"
*Font Times-BoldItalic: Standard "(001.001)"
*Font Times-Italic: Standard "(001.001)"
*Font Times-Roman: Standard "(001.001)"
*Font ZapfChancery-MediumItalic: Standard "(001.002)"
*Font ZapfDingbats: Special "(001.000)"
*?FontQuery: "
save 4 dict begin /sv exch def
/str (fonts/ ) def
/st2 30 string def
{
count 0 gt {
dup FontDirectory exch known {pop 1}{
str exch st2 cvs dup length /len exch def
6 exch putinterval str 0 len 6 add getinterval mark exch
{ } st2 filenameforall counttomark 0 gt {
cleartomark 1}{cleartomark 0}ifelse
}ifelse = flush
}{ exit } ifelse
} bind loop sv end restore
"
*End
*?FontList: "
FontDirectory { pop == flush } forall
/filenameforall where {
pop save (fonts/*) {
dup length 6 sub 6 exch getinterval == flush
} 128 string filenameforall restore
} if
(*) = flush
"
*End
*% Printer Messages (verbatim from printer):
*Message: "%%[ exitserver: permanent state may be changed ]%%"
*Message: "%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%"
*Message: "\FontName\ not found, using Courier"
*% Status (format: %%[ status: <one of these> ]%% )
*Status: "idle"
*Status: "busy"
*Status: "waiting"
*Status: "printing"
*Status: "warming up"
*Status: "PrinterError: timeout, clearing printer"
*Status: "PrinterError: warming up"
*Status: "PrinterError: service call"
*Status: "PrinterError: paper entry misfeed"
*Status: "PrinterError: no toner cartridge"
*Status: "PrinterError: paper entry misfeed"
*% Input Sources (format: %%[ status: <stat>; source: <one of these> ]%% )
*Source: "serial9"
*Source: "serial25"
*Source: "AppleTalk"
*% Printer Error (format: %%[ PrinterError: <one of these> ]%%)
*PrinterError: "timeout, clearing printer"
*PrinterError: "warming up"
*PrinterError: "service call"
*PrinterError: "paper entry misfeed"
*PrinterError: "no toner cartridge"
*PrinterError: "paper entry misfeed"
*DeviceAdjustMatrix: "[1 0 0 1 0 0]"
*% Color Separation Information =====================
*DefaultColorSep: ProcessBlack.71lpi.1000dpi/71 lpi / 1000 dpi
*InkName: ProcessBlack/Process Black
*InkName: CustomColor/Custom Color
*InkName: ProcessCyan/Process Cyan
*InkName: ProcessMagenta/Process Magenta
*InkName: ProcessYellow/Process Yellow
*% For 60 lpi / 400 dpi =====================================================
*ColorSepScreenAngle ProcessBlack.60lpi.400dpi/60 lpi / 400 dpi: "45"
*ColorSepScreenAngle CustomColor.60lpi.400dpi/60 lpi / 400 dpi: "45"
*ColorSepScreenAngle ProcessCyan.60lpi.400dpi/60 lpi / 400 dpi: "15"
*ColorSepScreenAngle ProcessMagenta.60lpi.400dpi/60 lpi / 400 dpi: "75"
*ColorSepScreenAngle ProcessYellow.60lpi.400dpi/60 lpi / 400 dpi: "0"
*ColorSepScreenFreq ProcessBlack.60lpi.400dpi/60 lpi / 400 dpi: "60"
*ColorSepScreenFreq CustomColor.60lpi.400dpi/60 lpi / 400 dpi: "60"
*ColorSepScreenFreq ProcessCyan.60lpi.400dpi/60 lpi / 400 dpi: "60"
*ColorSepScreenFreq ProcessMagenta.60lpi.400dpi/60 lpi / 400 dpi: "60"
*ColorSepScreenFreq ProcessYellow.60lpi.400dpi/60 lpi / 400 dpi: "60"
*% For 53 lpi / 400 dpi =====================================================
*ColorSepScreenAngle ProcessBlack.53lpi.400dpi/53 lpi / 400 dpi: "45.0"
*ColorSepScreenAngle CustomColor.53lpi.400dpi/53 lpi / 400 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.53lpi.400dpi/53 lpi / 400 dpi: "71.5651"
*ColorSepScreenAngle ProcessMagenta.53lpi.400dpi/53 lpi / 400 dpi: "18.4349"
*ColorSepScreenAngle ProcessYellow.53lpi.400dpi/53 lpi / 400 dpi: "0.0"
*ColorSepScreenFreq ProcessBlack.53lpi.400dpi/53 lpi / 400 dpi: "53.033"
*ColorSepScreenFreq CustomColor.53lpi.400dpi/53 lpi / 400 dpi: "53.033"
*ColorSepScreenFreq ProcessCyan.53lpi.400dpi/53 lpi / 400 dpi: "47.4342"
*ColorSepScreenFreq ProcessMagenta.53lpi.400dpi/53 lpi / 400 dpi: "47.4342"
*ColorSepScreenFreq ProcessYellow.53lpi.400dpi/53 lpi / 400 dpi: "50.0"
*% For 85 lpi / 1000 dpi (5,5,2,6,6,2,20/3,0) ===============================
*ColorSepScreenAngle ProcessBlack.85lpi.1000dpi/85 lpi / 1000 dpi: "45.0"
*ColorSepScreenAngle CustomColor.85lpi.1000dpi/85 lpi / 1000 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.85lpi.1000dpi/85 lpi / 1000 dpi: "71.5651"
*ColorSepScreenAngle ProcessMagenta.85lpi.1000dpi/85 lpi / 1000 dpi: "18.4349"
*ColorSepScreenAngle ProcessYellow.85lpi.1000dpi/85 lpi / 1000 dpi: "0.0"
*ColorSepScreenFreq ProcessBlack.85lpi.1000dpi/85 lpi / 1000 dpi: "84.8528"
*ColorSepScreenFreq CustomColor.85lpi.1000dpi/85 lpi / 1000 dpi: "84.8528"
*ColorSepScreenFreq ProcessCyan.85lpi.1000dpi/85 lpi / 1000 dpi: "94.8683"
*ColorSepScreenFreq ProcessMagenta.85lpi.1000dpi/85 lpi / 1000 dpi: "94.8683"
*ColorSepScreenFreq ProcessYellow.85lpi.1000dpi/85 lpi / 1000 dpi: "30.0"
*ColorSepScreenProc ProcessYellow.85lpi.1000dpi/85 lpi / 1000 dpi: "
{1 add 2 div 3 mul dup floor sub 2 mul 1 sub exch
1 add 2 div 3 mul dup floor sub 2 mul 1 sub exch
abs exch abs 2 copy add 1 gt {1 sub dup mul exch 1 sub dup mul add 1
sub }{dup mul exch dup mul add 1 exch sub }ifelse }"
*End
*% For 71 lpi / 1000 dpi =====================================================
*ColorSepScreenAngle ProcessBlack.71lpi.1000dpi/71 lpi / 1000 dpi: "45.0"
*ColorSepScreenAngle CustomColor.71lpi.1000dpi/71 lpi / 1000 dpi: "45.0"
*ColorSepScreenAngle ProcessCyan.71lpi.1000dpi/71 lpi / 1000 dpi: "71.5651"
*ColorSepScreenAngle ProcessMagenta.71lpi.1000dpi/71 lpi / 1000 dpi: "18.4349"
*ColorSepScreenAngle ProcessYellow.71lpi.1000dpi/71 lpi / 1000 dpi: "0.0"
*ColorSepScreenFreq ProcessBlack.71lpi.1000dpi/71 lpi / 1000 dpi: "70.7107"
*ColorSepScreenFreq CustomColor.71lpi.1000dpi/71 lpi / 1000 dpi: "70.7107"
*ColorSepScreenFreq ProcessCyan.71lpi.1000dpi/71 lpi / 1000 dpi: "63.2456"
*ColorSepScreenFreq ProcessMagenta.71lpi.1000dpi/71 lpi / 1000 dpi: "63.2456"
*ColorSepScreenFreq ProcessYellow.71lpi.1000dpi/71 lpi / 1000 dpi: "66.6667"
*% end of PPD file for LaserMaster 1000
*%